The APM104 is a digital paging microphone for 4 zones which is equipped with a condenser element with cardioid characteristic, mounted on a 30 cm gooseneck. By means of a built-in compressor / limiter, the output level of the microphone signal is constantly maintained. The status of the reproduced signal is indicated on the front panel, to ensure the speaker that the message is clear and audible in all situations. The console has 4 zone selection buttons and three standard buttons with preassigned functions: PTT (Push To Talk), select all and clear. The functions can be freely programmed by using the APM configuration software. In combination with the AUDAC ARU relay groups, the APM paging consoles offer a wide range of possibilities.
| SYSTEM SPECIFICATIONS |
|---|
| Polar Pattern | Cardioid (unidirectional) |
| Sensitivity (1W/1m) | -42 dB |
| Indicators | 3 Colours illuminated push button |
| Level & status indication LED’s |
| Internal storage | 10 minutes audio or messages spread over max 30 files |
| Connectors | RJ45 (data + Power) |
| Connection standard | TIA/EIA T568B |
| Buttons | 4 x programmable zone/function |
| 1 x PTT (push-to-talk) |
| 1 x select & clear all |
| Microphone | Type | Back electret condenser |
| Gooseneck length | 350 mm |
| Frequency | Response (± 3 dB) | 100 Hz - 20 kHz |
| Power | Consumption | 4.8 W (max.) |
| Supply | 24 V DC (min. 16V DC) |
| Max. cable length | Without external PSU | 113 m |
| With external PSU | 300 m |
| PRODUCT FEATURES |
|---|
| Dimensions | 120 x 55 x 190 mm (W x H x D) |
| Weight | 1.350 kg |
| Data protocol | RS-485 |
| Audio protocol | Analogue |
| Digital (configurable) |
| Colours | Grey metallic front panel |
| Construction | Steel |
| Required cabling | Analog | UTP CAT5E |
| Digital | UTP CAT6 |
| Accessories | Included | Windscreen (MWS05/B) |
| Optional | ARJ03P junction box |
| | CP45ARJ RJ45 junction plate |
| | PSD24x external Power supply |