RC5-CW4™ for Cisco
USB2.0 + UVC + 5/12V Camera Power
The RC5-CW4™ camera extension kit has been designed to deliver a transparent, reliable, and cost-effective link between Cisco’s Codec Plus, Codec Pro or SX80 codecs, MX800/MX700/Room 55/Room 55 Dual/Room 70 Endpoints, and Webex 4K PTZ camera.
Base Kit: Inclusive of RC5 Modules, Kit Cables and Power Supply
- RC5-CE Camera Interface Module
- RC5-HE Codec/Head-End Interface Module
- RCC-C001-0.3M HDMI Camera Cable
- RCC-C002-0.3M UTP Camera Cable
- PPC-003-0.4 DC Power Camera Cable
- RCC-H001-1.0M HDMI Head-End Cable
- RCC-H016-1.0M UTP Head-End Cable
- WPS-12 Power Supply
KEY FEATURES
- Extends power (no factory camera PSU required), PTZ control and video over a CAT5e/CAT6 cable between 10m-100m.
- Specifically supports Ethernet-controlled cameras.
- Ethernet streaming video supported on 10/100 capable devices
- Simple Plug & Play installation, no programming required.
- Allows pass-through of manufacturer firmware updates from codec to camera.
- All hardware-specific camera and codec connection cables included.
- PowerSniffer included for testing SCTLink™ cable conductor continuity.
- Integrator only required to provide CAT5e/CAT6 SCTLink™ Cable.
TECHNICAL SPECS
- Video Format: HDMI, up to 1920x1080p @60Hz with HDCP support.
- Ethernet Connectivity (RC5-CE™): Single 10/100 Port
- Ethernet Connectivity (RC5-HE™): 10/100 Two Port Layer 2 Ethernet Switch